Cloudy water is not one problem. Soil stirred up by stock or a downpour, tannin from leaves and peaty ground, and algae hanging in the water can all look the same from the bank. A jar test splits them apart before you treat anything.
Fill a clean glass jar, leave it alone for a day or two, and watch what the water does. Sediment drops. Tannin stays brown. Algae stays green. Three photos, one when you fill it, one at 24 hours and one at 48 hours, are enough for us to see which you have.
Healthy Ponds products have been clearing ponds since 1999. They break down organic matter. They do not settle clay, and they do not strip the colour out of tea-stained water. That is why the jar comes first. If you would rather talk it through, call 09 415 0300.
How to carry out the jar test
Use water from the part of the pond that looks worst. A clear patch by the inlet will flatter the sample and send us the wrong picture.
- Collect the water in a clean, clear glass jar or container. Rinse it first, so you are not looking at whatever was in it last.
- Fill it about three-quarters full. You want a little air at the top, and enough water that a thin layer of sediment shows if it drops.
- Set it on a flat surface where it will stay put. A windowsill is fine if the sun will not cook the sample.
- Leave it for 24 to 48 hours. Do not shake it, stir it, or top it up. The test is what the water does when it is still.
- Take a photo as soon as you fill it, another after 24 hours, and another after 48 hours.
Hold the jar against something plain and light, and use the same light each time if you can. The camera should see the water, not the colour of the shed behind it. Note where you took the sample, and roughly how deep the pond is. A photo of the whole pond from the bank, taken the same day, belongs with the jar photos. A sample from one corner can miss a mat the wind has pushed to the other bank.
What the results mean
Sediment on the bottom, and clearer water above it. Soil, clay or other particles were hanging in the pond. Once the water stops moving, they drop. You see this after stock have been in, after a downpour, or after someone has been working the edge. Breaking down organic matter will not pull clay out of suspension, so this is not the same job as a green pond. The photos tell us whether it is worth treating, or whether the water just needs to settle.
Still cloudy, with little or nothing on the bottom. The particles are too fine to drop in two days, or something else is in the water. Fine clay does this. So does a light load of suspended debris. The two look alike if you hold the jar up to the sky, which is why the plain background matters. If that cloud has a green cast, read it as algae, not as dirt.
Brown or tea-coloured, and it stays that way. That colour is usually tannin, dissolved out of leaves, bark and peaty ground. It is in the water, not floating in it, so it will not settle, and a treatment that breaks down sludge will not take it out. A pond can be in good shape and still look like tea. pond dye is for water that is already clear. It is not the fix for a tannin stain. If the brown water also smells, or there is scum along the edge, say so. Smell is a different problem from stain, and common pond problems walks through that one.
Green, and it stays green. Planktonic algae are suspended through the water, so they do not drop the way silt does. A light green haze is the early stage. green water in spring is the guide for that, and common pond problems matches the look to a product. Natural Blast works through the water. AquaSphere PRO sits on the bottom. Rush is for mats and scum you can see on the surface, not for colour spread through the jar.
Pea-soup green, a bright scum, or a mat on the pond itself can be blue-green algae. That can be toxic to people, pets, stock and wildlife. Do not swim in it, fish it, or draw it for animals or irrigation until it has gone and the water is safe. Do not tip a chemical algaecide on it. In New Zealand that is tightly restricted, and breaking the cells open can release more toxin. A jar will not tell you which algae you have. If you are not sure, call 09 415 0300 before you treat.
What a jar will not tell you
It will not give you a nutrient number, an oxygen reading, or the name of the algae. Two days on a bench sorts the colour. It is not a lab test. It also will not size the pond. The jar tells you the type of problem. It does not tell you how many litres you are treating. The litres are in how much treatment a pond needs, and the pond calculator is where you get them.
If the water in the jar and the water in the pond disagree, trust the pond and say so when you write. We would rather have an honest note than a tidy sample.
Send the photos
Once the 48 hours are up, email the three jar photos to [email protected]. Add the bank photo if you have one, and a rough length, width and depth. We will look at what settled, what stayed coloured, and what that means for the next step. Or call 09 415 0300.
If the pond has already gone thick and green, do not wait on the jar. Start with the green water in spring guide, or send the details through the free pond treatment plan.



